SINGLE PHASE PAD MOUNTED TRANSFOMRER
These transformers are available in standard ratings and configurations or can be customized to meet specific needs.
Pad mounted transformers are placed inside a cabinet with doors and locks, usually located outdoors. These transformers are manufactured with ratings from 15-250 kVA.
Design Capability
- Mild steel, optional stainless steel tank
- Capacity: 15-250kVA
- Primary Voltage: 34.5KV-19.92KV, 13.8KV-7.957KV,
13.2KV-7.62KV, 12.47KV-7.2KV or others - Secondary Voltage: 120-240V, 240-480V, 347/600V or others
- Loop or Radial Feed Configuration
- Insulation Fluids: mineral insulating oil, Envirotemp™ FR3™ fluid
- H.V. TAP RANGE: ±2×2.5% or others
- BIL: 30V-150V
- ANSI, IEEE, DOE, CSA and NEMA or others Standards
Application
- High Efficiency design
- Special Ambient Design O Low Sound Level Design O 60 Hz Design
- K-Factor Rating
- Network type Transformers
All of these distribution transformers are oil-insulated, self-cooled, available in loop or radial feed, and dead-front. These transformers come in two basic configurations: radial and loop feed, which are selected based on the type of circuit on which the transformers will be installed. The transformer uses aluminum or copper winding and is optimized to maximize efficiency and footprint.
The transformers are developed and produced especially to satisfy the customer’s exact specification. We are continuously committed to providing high-quality products: high voltage, no drifting of neutral point, low loss, small volume, cost-effective, safety and environment protection, with attractive appearance, etc.